Purpose

Ultrabake™ Plugs with Handles are designed to plug plain and threaded holes; they will mask off the hole and allow finishing up to it.

How the product is used

The plug is tapered and is applied by using the handle to push the smaller diameter into the hole. The plug is removed by pulling on the handle located on the larger diameter of the plug.

The hole can be a blind hole or a through hole.

Recommended for

Powder coating, E-coating, Plating, Anodizing, Spray painting

Temperature Range

Maximum temperature 600°F (315°C)

Design Features

Tapered - The plug is tapered and can be fitted into a range of different diameters
Flexibility - The material is soft and conforming. This allows the plug to seal the hole
Handle - The plugs have a handle to ease and speed up insertion and removal
Visible - The handle can help an operator see the mask on the component and therefore speed up removal of masks
Reusable - The plugs are reusable depending on the application
Color coded - The Ultrabake™ plugs are color coded to ease identification and sorting
Identification - The Shercon name is on the plug

Storage conditions

Items should be stored in dry conditions at an ambient temperature of between 55°F (13°C) and 85°F (30°C). It is important to rotate stock and use the product in the order that it is received.