Purpose
Ultrabake™ Plugs are designed to plug plain and threaded holes; they will mask
off the hole and allow finishing up to it.
How the product is used
The plug is tapered and is applied by pushing the smaller diameter into the hole.
The plug is removed by pulling on the larger diameter.
The hole can be a blind hole or a through hole.
Recommended for
Powder coating, E-coating, Plating, Anodizing, Spray painting
Temperature Range
Maximum temperature 600°F (315°C)
Design Features
Tapered - The plug is tapered and can be fitted into a range of
different diameters
Flexibility - The material is soft and conforming. This allows the
plug to seal the hole
Reusable - The plugs are reusable depending on the application
Color coded - The plugs are color coded to ease identification and
sorting
Identification - The Shercon name is on the plug
Storage conditions
Items should be stored in dry conditions at an ambient temperature of between
55°F (13°C) and 85°F (30°C). It is important to rotate stock and use the product
in the order that it is received.
|