Purpose
Ultrabake™ Caps are designed to mask
plain and threaded studs, tube ends and even slotted holes; they will mask off
the stud and allow finishing up to it.
How
the product is used
The cap is applied by being
pushed over the stud. It is removed by being pulled off. It can be used as a
plug by being inserted into threaded or plain holes. However, on holes we would
recommend a plug such as the
UP series of
plugs or the
SPP
series of pull plugs. If the cap is used
as a plug it can be pushed into place using a rounded end rod or dowel.
Recommended for
Powder coating, E-coating, Plating,
Anodizing, Spray painting
Temperature Range
Maximum temperature 600°F (315°C)
Design Features
Flexible -
The cap is flexible so it can fit a range of different diameters and shapes
Tight Fit - Caps are flexible enough to stretch over large
diameters and form a tight fit
Lengths - Many of the diameters are available in different lengths
Reusable - The caps are reusable depending on the application
Color coded - The caps are color coded to ease identification and
sorting
Identification - The Shercon name is on the cap
Storage conditions
Items should be stored in dry conditions
at an ambient temperature of between 55°F (13°C) and 85°F (30°C). It is
important to rotate stock and use the product in the order that it is received.
|