 |
E.P.D.M. Flangless Plugs 350°F(177°C)
Purpose:
To plug threaded holes, for the powder coating, E-coating, plating, anodizing and spray painting industries. They will mask off the hole and can cover the top thread of the hole to allow painting up to the threads.
General Description:
The plug is applied by being pushed into the threaded hole and by being pulled out. It can be “screwed” in, but the profile of the plug is not a thread. The plug can be used on plain bores, but on these, we would recommend the UP or SP series of plugs.
Recommended for:
Plating, Anodizing and Spray Painting
|
 |