Purpose:
To cover plain and threaded studs, for the powder coating, E-coating, plating, anodizing and spray painting industries. They will mask off the stud and allow finishing up to the studs.

General Description:
The cap is applied by being pushed over the stud and by being pulled off. It can be used as a plug by being inserted into threaded or plain holes. However, on holes we would recommend the UP or SP series of plugs.

Recommended for:
Powder coating, E-Coating, Plating, anodizing, spray painting.

Dimensions:
A = 0.750"
B = 0.875"
C = 3.500"